Skip to Main Content

Lib Tech T.Rice Orca Splitboard 2022 + Spark R&D Summit Skins Splitboard Skins + Arc Splitboard Bindings 2022 + Spark Pucks

sku# 231399
Lib Tech - T.Rice Orca Splitboard 2022 + Spark R&D Summit Skins Splitboard Skins + Arc Splitboard Bindings 2022 + Spark Pucks
Model Info
This item is

Out of Stock

But fear not - there is plenty to explore...

Shop all Lib Tech Shop sale Lib Tech

Product Info

Splitboard

Lib Tech T.Rice Orca Splitboard 2022

They had to do it, and here it is: the Lib Tech T.Rice Orca Splitboard filets the favorite in twain, making the convertible pow killer the world has been waiting for. There's not much to say that you can't figure out on your own. This board is light, floaty, and ready for critical deep snow maneuvers in faraway places. Lib is offering the Orca split in three pow-ready sizes but only one speed: very very fast. Divide and conquer with this, the gnarliest splitboard in all the land. True open water domination is yours for the taking!

Product Details

Rocker Type

C2XA shorter, more aggressive banana rocker combined with cambers that sit more underfoot. Extra solid tip and tail pressure for power, pop, precision and end-to-end stability combined with a medium amount of pressure between your feet for carving, edge hold on ice and float in pow.

Flex

Medium - Stiff FlexStout enough to charge your hardest but without excessive harshness.

Shape

Volume-Shifted DirectionalMade to float, aim for 3cm shorter than your normal board.

Setback1.5"

Core

Split Construction5% Aspen / 95% Paulownia

Laminates

Triaxial / Biaxial Fiberglass / Basalt Alloy

Sidewalls

Birch Internal Sidewalls

UHMW Sintered Sidewalls

UHMW Tip / Tail Protection

Base

Sintered Knife Cut Base

Edges

Magne-Traction®Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.

Topsheet

Eco Sublimated Bio Beans

Graphics

Art by Mike ParilloMagical mirrored prismic refractory Orca interpretations have never looked so good.

Binding Compatibility

Standard Splitboard Insert Pattern

Specs

  • Terrain: Splitboarding More 
    Splitboarding
  • Ability Level: Advanced-Expert More 
    Advanced-Expert
  • Rocker Type: Camber/Rocker/Camber More 
    Camber/Rocker/Camber
  • Shape: Directional
  • Flex Rating: Stiff More 
    Stiff
  • Core/Laminates: Basalt, Wood
  • Edge Tech: Magne-Traction
  • Athletes: Travis Rice
  • Warranty: 1 Year
Size 153 156 159
Effective Edge (mm) 1100 1130 1150
Tip Width (mm) 305 308 311
Waist Width (mm) 263 265 267
Tail Width (mm) 296 301 302
Sidecut Radius (m) 8.0 8.0 8.0
Stance Setback (in) 1.5 1.5 1.5
Stance Range (in) 17 - 24 17 - 24 17 - 24
Width Regular Regular Regular
Splitboard Skin

Spark R&D Summit Skins Splitboard Skins

The Spark R&D Summit Skins Splitboard Skins will have you motoring along the diciest skin tracks in supreme confidence. They're grippy, durable, easy to pull apart and feature dual angled hooks with an extended slot design that ensures they attach to the wackiest of board shapes. Never worry about slipping or losing your way on the skin track again, the Summit Skins have you covered.

Product Details

Material

NylonDurable Nylon construction repels water, glides smoothly, and grips the snow firmly for optimal backcountry performance on long ascents and rolling terrain.

Tip and Tail Attachments

Dual Angled Hooks

Extended Slot Design

Features

Long Lasting Glue

Compatibility

Compatible with All Splitboards

Specs

  • Material: Nylon
  • Compatibility: Trim to Fit
  • Warranty: 5 Years
Size 147-161 159-175 172-186
Length (cm) 147-161 159-175 172-186
Weight (g) 582
Splitboard Binding

Spark R&D Arc Splitboard Bindings 2022

Lightweight, durable, and simple to use out in the field, the Spark R&D Arc Splitboard Bindings hit all the right notes for bomber backcountry performance. Their proven Tesla T1 platform uses an integrated snap toe ramp to positively lock into touring brackets and over any splitboard pucks, making for speedy, straightforward transitions, even with gloves on. Aluminum baseplates are CNC machined with cutouts that minimize weight without compromising strength, and allow for convenient puck adjustment. In ride mode the Rip ‘N’ Flip Highbacks are medium flexing for a smooth, surfy feel, perfect for the rider headed for pow. Give yourself a head start on fresh tracks with the Spark R&D Arc Splitboard Bindings.

Product Details

Tour Mode

Tesla T1 SystemTesla T1 bindings slide sideways into the offset touring brackets and are locked into place with the snap ramp. No pins, no cables, no fiddle factor.

Whammy Bar Climbing WireA single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12°), to high (18°) and back again while touring.

T1 Heel RestThe T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Step Locker in place.

Ride Mode

Snap to RideT1 bindings slide across pucks utilizing the snap ramp to lock into place for a tight ride down.

Baseplate

CNC Machined AluminumCNC machined baseplates with maximum cutouts to shave weight yet maintain strength and performance. Cutouts also conveniently allow for puck adjustment with bindings in place for precise stance adjustment.

Straps

Pillow Line StrapsPillow Line Straps are ultra durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride.

Buckles

Burton BucklesAll straps incorporate Burton's bomber buckles. Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests.

Highback

Rip ‘N’ Flip HighbacksThe Rip ‘N’ Flip highback is made from proprietary blended materials for strength, durability and light weight. All Rip ‘N’ Flip highbacks incorporate a tool-free forward lean adjuster (FLAD) for complete customization from 0° to 22° in ride mode. The FLAD toggles easily between forward lean position and -13° touring position for easy transitions.

Compatibility

Puck CompatibilitySlide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode, period. Spark R&D bindings are designed to work with all puck compatible splitboard models.

Additional Features

In The BoxBindings, Tesla touring brackets, T1 heel rests, aluminum mounting screws, and Spark pocket tool.

Requires Spark or Voile Pucks - Sold Separately

Specs

  • Ability Level: Advanced-Expert More 
    Advanced-Expert
  • Mounting Pucks: No
  • Made in the USA: Yes
    Yes
  • Warranty: 5 Years
Size S M L
Weight (g) 1256
Splitboard Hardware

Spark R&D Spark Pucks

The new Spark R&D Spark Pucks give you almost unlimited stance options for splitboards with standard insert patterns. The oversized aluminum discs overlap the binding channels for enhanced rigidity and mount strength. Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models.

Product Details

Includes

4 discs and 4 baseplates

Materials

Aluminum / Nylon

Features

Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering

Plus or minus 30˚ angle adjustments

Infinite stance width and setback options

Compatibility

Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models

Specs

  • Mounting Pucks: Yes
  • Made in the USA: Yes
    Yes
Reviews
Q&A
icon-returns icon-ruler icon-ruler-mini icon-compatibility icon-location