Alpine V1 Profile – The ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow. The camber runs longer in the tail—providing extra power for the ascent or for larger riders drawn to a dedicated wide series.

Directional Flex

Flex Rating – 7 (1 Soft - 10 Stiff)

Radical Taper – Engineered for deep powder but still versatile around the mountain, this RADIAL sidecut is complemented by a TAPERED TAIL. This narrower tail section naturally sinks in the powder while the wider nose section floats above the snow line. The result is less work and more fun as the board surfs on one smooth continual arc.

Ascend 2 Split Core™ – Premium weight-graded Poplar aligned with Paulownia and an ABS centerline resulting in a high-end split specific core. This core retains the primary poppiness of Poplar while remaining lightweight due to pressure-bonded dual-species wood core strips.

Triax/Triax Holysheet™ – The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. Triaxial fiberglass is placed on both the top and bottom of the core providing maximum strength, durability and performance.

Amplitech™ V-Tech Amplifier – Amplitex™ is a next-generation natural flax fiber woven with carbon strands that is featured in high-end snowboard constructions. This fusion tape brings the best of two worlds: the reactive energy of carbon and the lightweight and dampening aspects of flax. The two fibers are highly compatible since they have similar properties regarding thermal expansion and failure strain, creating a uniformly flexing reinforcement that's light, snappy and durable all in one.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Full ABS1000 Sidewalls

ABS Centerline

Powder Drive™ Base – Dynamic and durable, easy to maintain and reliable, this base material is electric through the trees and fast over the flats. Featuring attributes of both sintered and extruded base material the POWDER DRIVE™ base was exclusively formulated for the extra-wide chassis of the Spring Break Powder Division and were designed with the powder lifestyle in mind.

360 Degree HRC48 Steel Edges

PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.

DuraTail™ V2 Die-cut Topsheet

Multitech™ Level 6 DeepSpace™ Silkscreen with Metallic Underlay – The DEEPSPACE™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Die-Cut Base

Union Clips and Hooks – Reengineered Union CNC aluminum clips.

Stainless Steel 4 x 2 Inserts

65% Mohair / 35% Nylon

Tail Clips Designed to Fit a Wide Variety of Board Shapes

Rip Strips Make it Easy to Pull Skins Apart

Trim to Fit

Spring Loaded Pin System – By combining the standard pin system with the Split System baseplate, Union increases the amount of connection between board and binding. Just one pin changes the mode and locks it into place.

No-Nonsense Touring Mode – For touring, the binding slides into the climbing cradle and is locked into place with the pin.

Integrated Climbing Bar

Ride Mode – For riding, the binding slides onto the baseplate which rotates over the center of the board. The pin slides the through the middle of the baseplate for maximum connection.

Flex Rating – 7/10

SP2 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.

Extruded 3D Aluminum Heelcup

Exoframe 4.0 Ankle Strap – Rapid response, trusted by professional snowboarders.

TS 2.0 Toe Strap with Pin

Tool-Less Adjustability

Magnesium 3.0 Ratchets – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Split FLAD 2.0 Forward Lean Adjust – Flip between walk and ride mode in an instant.

EXP2 Duraflex ST – The perfect balance of flex and response for all types of riding.

Fits Standard Splitboard (Voile) Insert Pattern

In The Box – Mounting hardware, Explorer split discs, Explorer Quiver Disk, touring brackets, splitboard strap.

Non-Stick EVA Disk Cover